Home/PSMT Guide/formulate

Luna Academy PSMT Comprehensive Guide

Deep-dive guidance, rubric descriptors, annotated exemplars, and common pitfalls for all four QCAA Senior Mathematics Instrument-specific Marking Guide (ISMG) criteria.

Word Budget: ~2,000w Total Max Page: 10 Pages
ISMG Assessment Criterion

Formulate: Transforming Real-World Context into Mathematical Architecture

4 Marks (ISMG Top Band) ~400 – 500 words (including ~200w Introduction)

The Formulate criterion assesses your ability to mathematiseβ€”taking an unstructured, messy real-world problem and translating it into purposeful mathematical structures. A top-tier response establishes an independent narrative, defines the scope through justified observations, and sets boundaries via defensible assumptions.

🎯Official ISMG Top-Band Descriptors (Full Marks Requirement):
  • βœ“Justified mathematical translation of all significant aspects of the task
  • βœ“Justified statements of important, verified observations
  • βœ“Justified statements of important, rational assumptions
πŸ“„

1. Introduction to the Task (~200 words)

The introduction must achieve two critical objectives under QCAA guidelines before solving begins:

1 Objective 1: Independent Readability

Your report must be fully understood by a person who has never seen your school task sheet. No reference to the task sheet should ever be made. Begin by providing real-world context on what the problem is and why solving it is important.

2 Objective 2: Justified Mathematical Translation

Briefly describe the mathematical frameworks you will use to solve the problem (applicable mathematical or statistical principles, concepts and techniques) and the technology you will use throughout the task (GeoGebra, TI-84 Plus CE, Excel).

🌟 Luna Annotated Exemplar: Standalone IntroductionISMG Target: Top Descriptors

"As municipal energy grids transition toward renewable generation, managing decentralized battery storage capacity is crucial for network resilience. Fluctuating solar irradiance and residential load profiles require predictive models before peak blackouts occur (Clean Energy Council, 2023). The purpose of this task is to determine an accurate prediction for peak battery discharge demands in Australia for 2035 by comparing multiple mathematical models. A multitude of mathematical techniques will be utilised throughout this task, including; modelling of exponential, logarithmic, logistic, and sinusoidal functions, as well as deriving to find rates of change, determining percentage error, and using technology such as GeoGebra, a TI-84 Plus CE Graphics Calculator, and Excel to model equations and manage data."

πŸ”„

2. The Formulate Architectural Flowchart

It is vital that your assumptions and observations are both important and expressed as justified statements. The entire downstream credibility of your PSMT depends on them, as mapped below:

1 Stage 1

Stage 1: Consider Observations & Formulate Necessary Assumptions

Empirical observations are gathered from credible sources and simplifying assumptions are established in order to mathematise the unstructured real-world problem.

Formulate (3–4 Marks): Justified statements of important observations & assumptions
⚠️ If an assumption or observation does not directly impact the mathematical equations that follow, examiners will deem it unimportant.
2 Stage 2

Stage 2: Mathematical Execution & Dependency Check

The mathematical solution is constructed upon these foundational premises. If the solution does not strictly rely on them, they fail the criteria for being important.

Solve & Formulate: Accurate mathematical translation of important aspects
⚠️ Assumptions lacking rational justification or citations provide weak evidence for the overall validity of the solution.
3 Stage 3

Stage 3: Reasonableness Evaluated Through Assumptions

Once a quantitative solution is found, justified statements about the reasonableness of the solution are formulated by considering the observations and assumptions.

Evaluate (4–5 Marks): Justified statements about reasonableness considering assumptions
⚠️ Common student error: Evaluating whether the assumption was reasonable, rather than evaluating whether the solution was reasonable in light of the assumption!
4 Stage 4

Stage 4: Critical Strengths & Limitations Diagnosis

At the conclusion of the PSMT, justified statements of relevant strengths and limitations are determined directly by re-examining the assumptions and observations made.

Evaluate (4–5 Marks): Justified statements of relevant strengths and limitations
⚠️ If assumptions were poorly formulated or trivial, completing meaningful strengths and limitations becomes difficult.

Observations vs. Assumptions

Students can often be confused about the difference between an observation and an assumption. Both are vital to creating a mathematical model but serve different purposes:

AspectObservations (Empirical Facts)Assumptions (Simplifying Premises)
Core DefinitionEmpirical data, physical measurements, or factual information gathered from credible sources to parameterize the problem.Simplifying conditions, boundaries, or operational premises accepted as true to make the problem solvable within syllabus scope.
VerifiabilityDirectly verifiable through empirical records, historical statistics, sensor logs, or authoritative publications (e.g. ABS, BoM).Cannot be empirically verified prior to solving, but are logically defensible, plausible, and grounded in domain rationale.
Role in ModelingProvides initial conditions, baseline constraints, data points for regression, and empirical validation benchmarks.Tames real-world complexity, bridges data voids, restricts variables, and defines the structural limits of the model.
FlexibilityFixed and immutable. Real-world facts cannot be altered, though subsequent observations may reveal evolving trends.Flexible and adaptable. Can be tuned, relaxed, or replaced during sensitivity testing and iterative refinement.
Luna ExemplarThe Australian Bureau of Meteorology recorded an average regional solar irradiance of 5.8 kWh/mΒ²/day across 2021–2024 (BoM, 2024).Assume photovoltaic panel degradation is linear at 0.5% per annum based on manufacturer median specifications (SolarSpec, 2023).

2.1 Observations: The 3-Part Structure

Empirical Evidence

To reach the level of justified statements, each observation must include:

  • 1.Statement: An explicit declaration of what the empirical observation is.
  • 2.Reference: In-text referencing to a reputable source (the gold-standard).
  • 3.Justification: Explanation of how this observation impacts the mathematical model.
Annotated Student Sample:

"It was observed that the male-to-female ratio in Western Australia is 102 males for every 100 females (McCrindle, 2014). This observation directly impacts the mathematical model as the initial total population must divide by this ratio only to consider the female Western Australian population. This is relevant as males do not reproduce any offspring and cannot be factored into the Leslie matrix."

2.2 Assumptions: The 3-Part Structure

Simplifying Conditions

Referencing can be used to justify an assumption in two distinct ways:

  • βœ“Use a source that brings your mathematical model closer to representing the real world.
  • βœ“Use a source that takes your model further from the real world, but is required to reduce complexity.
Annotated Student Sample:

"It was assumed that birth rates would only impact women aged 15–44 as in Australia. The average woman's reproductive years are between ages 15 and 44 (Watson, 2018). This assumption restricts birth rates to only six of twenty-one age classes. The assumption was made to reduce anomalies to develop clean data."

The Fidelity vs. Complexity Trade-Off

Each assumption can be thought of as existing on a spectrum where mathematical complexity increases as fidelity (how closely the assumption models the real world) increases. Adopting this trade-off approach from the beginning makes evaluating reasonableness, strengths, and limitations effortless later on.

Low Complexity / Simplified
Assumes taut cable with zero catenary sag, constant gravity, or instantaneous driver braking
βž” Tractable with basic algebra & right triangles
Complexity ↑
πŸ“ˆ
Fidelity βž”
High Fidelity / Realistic
Includes hyperbolic catenary cable curvature, driver neural reaction delay, temperature drag
βž” Requires differential equations & numerical integration
Avoid Costly Deductions

Common Pitfalls in Formulate: Transforming Real-World Context into Mathematical Architecture

⚠️ Referencing the Task Sheet Directly

Writing phrases like "As stated in Question 2 of the task sheet..." immediately violates the standalone readability requirement.

Luna Remedy: Introduce all background context, stakeholder requirements, and objectives purely through your own introductory text with proper secondary citations.
⚠️ Conflating Observations with Assumptions

Listing known statistical facts as assumptions, or treating speculative guesses as empirical observations.

Luna Remedy: Use Luna's comparison framework: If it can be verified with recorded data, it is an observation. If it is a condition you adopt to make the mathematics tractable, it is an assumption.
⚠️ Unjustified or "Dead-End" Assumptions

Listing assumptions such as "assume gravity is 9.8 m/sΒ²" without ever explaining why that choice matters or how it alters your mathematical working.

Luna Remedy: Every assumption must link to an explicit equation, parameter, or boundary condition used in the Solve section.